Solar farms are large, remote and unlit, which makes them hard to protect with fence-line cameras alone. Hikvision recommends a two-layer design: fibre-optic vibration sensing along the whole fence to detect intrusions, and a smaller number of PTZ or thermal cameras that turn to verify each alert. The result is fewer false alarms, no gaps in coverage and far less infrastructure to install.
A utility-scale solar farm holds thousands of panels, inverters and long runs of copper cable spread over open land. Hikvision notes that a 100 MW site can cover as much as 400 acres. Most are unmanned, unlit at night and some distance from the nearest response.
Theft is a genuine problem in the UK. Hikvision cites at least 70 recorded thefts from UK solar farms in the first eight months of 2024, with more than a fifth involving over 20 km of copper cable.
Infrared beams and electric fences split the boundary into zones, but coverage is not continuous. Corners, dips in the ground and gate transitions can leave gaps, and wind and wildlife cause frequent false alarms that the system cannot tell apart from a person.
Covering the fence with cameras solves verification, but the cost adds up quickly. Hikvision estimates that a 500 m stretch of fence needs eight to ten cameras for full visual coverage, and each one needs a pole, power and a network connection. At night, without extra lighting, many of those cameras still struggle to produce useful images.
The newer model flips the roles. Fibre does the detecting; cameras do the checking.
Hikvision's fibre processors use its HIK-DAS distributed acoustic sensing with AI to recognise vibration patterns and reject those caused by wind, rain, snow and small animals. A DeepinMind NVR then analyses the camera footage as a second check. If the event is confirmed, a network speaker near that spot can give a spoken warning, and the control room receives the alert with live video and the location attached.
Zenith Security Co. is an authorised Hikvision partner with a trade counter in Wolverhampton, and stocked orders are dispatched within 1–2 working days. For the verification layer, browse our PTZ IP cameras and thermal cameras, or explore the wider Hikvision range. For larger energy-site projects, contact our team to talk through your requirements. Hikvision prices are shown to signed-in trade customers.
A sensing cable fixed to the fence picks up the vibration of climbing or cutting, and the processor pinpoints where along the fence it happened.
No. The cable is passive, so power and network are only needed at the processor end.
Hikvision's HIK-DAS analysis is designed to reject vibration from wind, rain, snow and small animals, and camera verification adds a second check.
No. Substations, wind farms and oil and gas sites with long, remote perimeters can use the same approach.
Source: Hikvision, Solar farm perimeter security: How to cut false alarms, deployment costs, and blind spots. Product details are correct at the time of writing; always check the latest Hikvision datasheet before installation.





















































