Wireless CCTV makes sense when running cable is expensive, disruptive or impossible, such as on remote land, temporary sites or finished shops and homes. Hikvision's Cable-Free Series covers three situations: solar-powered 4G cameras for sites with no power or internet, Wi-Fi NVR kits for larger premises, and Wi-Fi NVS kits for small spaces. The right choice depends on power, signal and how many cameras you need.
A wired IP system is still the benchmark for reliability on many jobs, but it has drawbacks that put some customers off:
Cable-free systems trade that for faster installation, more freedom over placement and the option to move or add cameras without new infrastructure.
Hikvision's AOV (Always on Video) solar 4G cameras are aimed at farms, construction sites, car parks and other remote locations. Key points from Hikvision:
They suit temporary or multi-site jobs, such as a builder covering several plots without paying for power and broadband at each one. Before specifying, check mobile signal at the exact mounting spot and think about how much sun the panel will get through a UK winter.
For multi-floor shops, supermarkets, warehouses and bigger homes, the EasyLink Wi-Fi NVR kit manages up to eight cameras from one recorder. Hikvision highlights:
Hikvision's example is a two-storey clothes shop covered by five or six cameras, with the live view shown on a screen near the entrance.
For cafes, small shops, offices and homes, the EasyLink Wi-Fi NVS kit uses a compact network video storage unit rather than a full recorder. Setup is done by scanning a QR code, footage is kept locally on an SD card of up to 512 GB, and the router can be changed without reconfiguring the whole system. Hikvision suggests a two-camera kit can be installed in around an hour.
Unless a camera is solar or battery powered, it still needs a power supply at its location, so wireless usually means no data cable rather than no cable at all. Wi-Fi range is also affected by walls, floors and distance from the recorder, so a quick signal check at each camera position saves call-backs.
The same logic applies to alarms. A wireless alarm such as Hikvision's AX PRO range avoids running cable to every detector, which makes it a common choice for occupied homes and fitted-out businesses. Pairing a wireless alarm with cable-free cameras gives full coverage with very little disruption to the building.
Hikvision points to smarter AI to reduce false alarms further, longer battery life through solar and battery improvements, 5G connectivity and more processing on the device itself. Choosing a well-supported platform now makes it easier to adopt those changes later.
Zenith Security Co. is an authorised Hikvision partner with a trade counter in Wolverhampton, and orders are dispatched within 1–2 working days. To price up a camera system, start with our CCTV kit builder. For wireless intrusion protection, see the Hikvision AX PRO wireless alarm range or build a kit with the Hikvision alarm system builder. Hikvision prices are shown to signed-in trade customers. For availability of specific cable-free models, contact our team.
With the EasyLink Wi-Fi NVR and NVS kits, Hikvision says local recording and live view continue during an internet outage because footage is stored on site.
That is what the AOV solar 4G cameras are designed for. Check mobile coverage and how much sunlight the panel will get before installing.
Up to eight cameras, with up to four shown at once on a monitor via HDMI.
No. Where cable can be run easily, a wired PoE system is often the simpler long-term option. Wireless is strongest where cabling is costly or disruptive.
Source: Hikvision, Breaking free from cables: the Hikvision guide to wireless security solutions. Product details are correct at the time of writing; always check the latest Hikvision datasheet before installation.





















































