Pyronix LightCamera2: Floodlight Wi-Fi Camera Explained

LightCamera2 is a new outdoor Wi-Fi camera from Pyronix that puts a 3MP camera, two 2600-lumen floodlights and a built-in siren in one weatherproof unit. It reports through the HomeControl2.0 app with still-image alerts, so users can see what set it off. Pyronix launched it in September 2026 and say it is now available through distribution.

What LightCamera2 is for

Most outdoor cameras are good at recording an incident and not much else. LightCamera2 is built to react while something is happening: movement in a detection zone switches on the floodlights, the siren can sound, and the owner gets a notification with a picture. For a driveway, side passage or rear garden that is a far stronger deterrent than a camera quietly filming in the dark.

Pyronix also position it as an add-on for existing customers. If you already look after a Pyronix alarm with the HomeControl2.0 app, the camera gives the customer something visible and practical without changing the alarm itself.

Key features

Picture quality

  • 3MP sensor recording at 2304 x 1296
  • Infrared night vision up to 18m
  • H.265 compression to keep storage and bandwidth use down, which matters on a home broadband upload
  • DWDR and 3D DNR to help with bright backgrounds and low-light noise

Lighting and deterrence

  • Two 2600-lumen floodlights triggered by movement
  • Built-in siren
  • Two-way audio, so the owner can speak to a visitor or warn someone off
  • IP65 rating for outdoor mounting

Recording and detection

  • Micro-SD card storage up to 256GB
  • Continuous, motion-triggered or scheduled recording
  • Adjustable detection zones and motion sensitivity
  • Human Body Filtering to cut down alerts from things that are not people

App and integration

Alerts arrive in HomeControl2.0 with a still image for verification. The camera is also ONVIF compatible, so it can be added to a compatible third-party video management system or recorder where a site already has one.

Installation notes for UK installers

Pyronix have kept the fitting side simple. The camera has a split terminal block and a pre-attached camera connection, and Wi-Fi setup is designed to be quick. In practice that means you can make off the supply at the wall, then connect the head, which is easier when you are working from a ladder.

Before you fit it

  • Check the Wi-Fi signal at the mounting point. Exterior walls, especially solid brick or stone, weaken signal. Test with a phone before drilling.
  • Plan the detection zones. Set zones and sensitivity to cover the customer's own property, and keep floodlights angled so they do not shine into neighbours' windows.
  • Agree what gets recorded. Talk through continuous versus motion-only recording and the card size so the customer knows how far back footage will go.
  • Explain the siren. Make sure the customer understands when it will sound so it is a deterrent, not a nuisance.

Pyronix have not published every technical detail in the launch article, such as the Wi-Fi standard and power requirements, so check the product datasheet before you quote and fit.

Who it suits

  • Homeowners who want lighting, a siren and camera alerts at one entrance from a single device
  • Existing Pyronix customers already using HomeControl2.0
  • Small commercial sites where a lit, recorded approach is enough and a full CCTV system is not needed
  • Installers looking for a straightforward upgrade to offer on a service visit

Pyronix CEO Laurence Kenny describes it as taking outdoor security beyond simply recording events, with the aim of helping people respond to a threat sooner.

Buying Pyronix from Zenith

LightCamera2 is newly launched, so contact us for availability. We already list the original Pyronix WiFi LightCamera (LIGHT-CAM/WHT), and the full range is on our Pyronix brand page. If the camera is part of a new alarm, our Pyronix alarm system builder helps you put an Enforcer kit together. Orders are dispatched within 1–2 working days.

Frequently asked questions

Does LightCamera2 work with the HomeControl2.0 app?

Yes. Pyronix say it sends real-time alerts to HomeControl2.0 with a still image, so the user can check what triggered the event.

How is footage stored?

On a micro-SD card of up to 256GB fitted in the camera. You can choose continuous, motion-triggered or scheduled recording.

Can it connect to a third-party NVR?

It is ONVIF compatible, so it can be integrated with compatible third-party video management systems. Check compatibility with the specific recorder before fitting.

Is it suitable for outdoor use in the UK?

It is rated IP65, which covers outdoor mounting in rain. As with any exterior camera, choose a position with a reliable Wi-Fi signal.

Source: Pyronix, Introducing LightCamera2. Product details are correct at the time of writing; always check the latest manufacturer documentation before installation.

Published at: 15-11-2026 / 1 Views
  • Ajax logo
  • AV:Link logo
  • Adastra logo
  • AudioCodes logo
  • Brackenheath logo
  • C.K Tools logo
  • Cisco logo
  • Citronic logo
  • Coast logo
  • Cürv logo
  • Dahua logo
  • EPOS logo
  • Eagle CCTV logo
  • Excel Networking logo
  • Fike logo
  • Gigaset logo
  • Grandstream logo
  • HP Poly logo
  • HiLook by Hikvision logo
  • Hikvision logo
  • Honeywell logo
  • Jabra logo
  • Lexstar logo
  • Mercury logo
  • Mercusys logo
  • Mitel logo
  • Panasonic logo
  • Paxton logo
  • Pyronix logo
  • Ring logo
  • Ruijie Reyee logo
  • SPRO logo
  • Samsung logo
  • Shokz logo
  • TP-Link logo
  • TP-Link Omada logo
  • TP-Link VIGI logo
  • Tenda logo
  • Texecom logo
  • Toshiba logo
  • Ubiquiti logo
  • Unify logo
  • Union logo
  • Uniview logo
  • Valcom logo
  • Visonic logo
  • Western Digital logo
  • Yale logo
  • Yealink logo
  • Yeastar logo
  • Yuasa logo
  • Zenith Security Co. logo
  • Zinc logo