The Omada Fusion 2.5G is a gateway with an Omada controller built in, designed to link several sites over encrypted VPN tunnels and let you manage them remotely without a licence subscription. TP-Link says its full-mesh SD-WAN can connect up to 20 locations automatically, without a public IP address. For multi-site retailers, cafés, clinics and the installers who look after them, the main win is fewer trips to site.
A business with two shops and an office often ends up with three separate networks, each configured slightly differently, and no way to see what is happening at any of them without being there. Sharing a stock system or till data between sites traditionally means either expensive private circuits from a carrier or hand-built VPN tunnels that take real expertise to set up and maintain.
A site-to-site VPN creates an encrypted tunnel across the ordinary internet between the gateways at each location. Traffic is encrypted as it leaves one site and decrypted at the other, so staff can reach shared files, point-of-sale and stock systems as though everything were on one local network.
Because the controller is built in, a small site does not need a separate hardware or software controller. Our guide Do I need an Omada controller? explains the alternatives if you are weighing them up.
Rather than configuring each tunnel by hand, sites are connected to each other automatically, up to 20 locations, with IPsec and WireGuard supported. TP-Link states that no public IP address is needed during setup, which helps on broadband lines that do not provide one.
Omada LightLink VPN lets an administrator send one-click access to a remote user, so homeworkers can reach company resources without wrestling with VPN client settings.
The gateway can use several internet connections at once, balance traffic across them and fail over automatically if one drops. TP-Link's material refers to 4-WAN load balancing with failover.
The unit has five 2.5G ports and TP-Link quotes 2.1 Gbps-class IDS/IPS throughput. A built-in touchscreen shows speed tests, traffic information and fault alerts for anyone on site.
The second half of the story is remote management. Through the Omada cloud portal or mobile app you get health scores, alerts and logs, live traffic monitoring and speed tests. For deeper fault-finding there is built-in SSH, packet capture and smart diagnostics. Problems can often be spotted before staff notice, and firmware updates and configuration changes can be pushed remotely, keeping every site consistent.
Cloud access is described as licence-free, with no recurring fees for Omada Network features, which keeps the running cost predictable for small businesses and for installers offering support contracts.
Onboarding is guided through the Omada app or web interface. Bluetooth lets you start setup without first configuring Wi-Fi, and the gateway discovers other Omada switches and access points on the network so they can be adopted in one batch.
When planning access points behind it, our guide to how many access points an office needs is a useful next step.
We stock the Omada Fusion 2.5G gateway alongside the rest of the TP-Link Omada range, with orders dispatched within 1–2 working days. Use the business network kit builder to plan a full site, or contact us to talk through a multi-site project.
No. The controller is built in, and cloud management is described as licence-free.
TP-Link says its full-mesh SD-WAN connects up to 20 locations automatically.
According to TP-Link, no public IP is required during setup.
IPsec and WireGuard for site links, plus Omada LightLink VPN for remote users.
Source: TP-Link, Site-to-Site VPN Made Simple: How the Omada Fusion 2.5G Connects Multiple Locations in Minutes and Remote Network Monitoring and Management for SMBs: How the Fusion 2.5G Gateway Replaces Site Visits. Product details are correct at the time of writing; always check the latest TP-Link datasheet before installation.





















































