Upgraded Texecom SmartCom 4G: What's New for Installers

Texecom has upgraded the SmartCom 4G communicator with support for all 4G bands, better signal sensitivity, a new antenna and a revised connection algorithm. Setup is quicker too, with QR code configuration, easier Wi-Fi joining and 4G signal strength shown on the unit's local webpage. For installers, the practical result should be fewer weak-signal sites and fewer call-outs.

What SmartCom 4G does

SmartCom 4G is Texecom's gateway between a Premier Elite panel and its cloud services: Texecom Connect for end users, Texecom Cloud for installers and Texecom Monitor for alarm signalling. It gives a panel a path to the outside world over 4G, with Wi-Fi as an additional route, which is increasingly important as copper phone lines are withdrawn. Our guide to the PSTN switch-off and Texecom Monitor covers the signalling side in detail; this article focuses on what has changed in the communicator itself.

What is new in the upgraded SmartCom 4G

Support for all 4G bands

The upgraded unit works across all 4G bands, which widens the range of network conditions it can cope with. That matters on sites where one band is congested or poorly covered but another is available.

Improved signal sensitivity

Texecom says sensitivity on the main bands has improved, and that in some cases this can extend usable range from a mast by up to four times. Treat that as a best case rather than a guarantee; building construction, location and local network coverage still decide the result on any given job.

A new antenna

The communicator ships with a new antenna designed to give a solid 4G signal wherever coverage exists. For basements, steel-framed buildings or rural properties, an optional external antenna is still available. Our SmartCom 4G external antenna guide explains when you need one and how to fit it.

A more resilient connection algorithm

Texecom has revised the logic the unit uses to stay connected when conditions are poor. The stated aim is better resilience and efficiency, so that a brief drop in signal does not turn into a lost connection and a site visit.

Faster installation

Several changes are aimed squarely at time on site.

  • QR code setup: a new QR code lets installers scan and configure the unit in one step, rather than keying in details by hand.
  • Easier Wi-Fi joining: a software update simplifies connecting the communicator to the customer's Wi-Fi network.
  • Signal strength on the local webpage: 4G signal strength is now displayed on the unit's local webpage, so you can move the antenna and see straight away whether the position is better or worse.

Practical tips on site

  • Check signal at the planned panel location before fixing anything; the webpage reading makes this quick.
  • Try a few antenna positions and note the best reading rather than accepting the first one that works.
  • If the reading is still marginal, plan for an external antenna rather than hoping the improved sensitivity will be enough.
  • Configure Wi-Fi as well as 4G where the customer's network allows, so the panel has more than one route.
  • Keep firmware current so the unit benefits from the latest connection improvements.

Which SmartCom should you choose?

SmartCom 4G suits sites where cellular connectivity is the priority or where there is no reliable broadband. Where a wired network is available, the SmartCom Ethernet and Wi-Fi communicator may be enough. For more demanding signalling requirements, our SmartCom Pro guide compares features and compatibility.

Buying Texecom from Zenith

Zenith supplies Texecom alarm equipment from our Wolverhampton trade counter, with orders dispatched within 1–2 working days.

Frequently asked questions

Does the upgraded SmartCom 4G still need an external antenna?

Usually not, thanks to the new antenna and improved sensitivity. On sites with weak 4G coverage, an optional external antenna is still available.

How do I check 4G signal strength during installation?

The upgraded unit shows 4G signal strength on its local webpage, so you can reposition the antenna and compare readings on the spot.

Which Texecom services does SmartCom 4G work with?

Texecom describes it as the gateway to Texecom Connect, Texecom Cloud and Texecom Monitor. Check Texecom's documentation for panel and firmware compatibility.

Can it use Wi-Fi as well as 4G?

Yes. Texecom has also updated the software to make joining a Wi-Fi network easier.

Source: Texecom, Introducing the upgraded SmartCom 4G communicator. Product details are correct at the time of writing; always check the latest manufacturer documentation before installation.

Published at: 15-11-2026 / 1 Views
  • Ajax logo
  • AV:Link logo
  • Adastra logo
  • AudioCodes logo
  • Brackenheath logo
  • C.K Tools logo
  • Cisco logo
  • Citronic logo
  • Coast logo
  • Cürv logo
  • Dahua logo
  • EPOS logo
  • Eagle CCTV logo
  • Excel Networking logo
  • Fike logo
  • Gigaset logo
  • Grandstream logo
  • HP Poly logo
  • HiLook by Hikvision logo
  • Hikvision logo
  • Honeywell logo
  • Jabra logo
  • Lexstar logo
  • Mercury logo
  • Mercusys logo
  • Mitel logo
  • Panasonic logo
  • Paxton logo
  • Pyronix logo
  • Ring logo
  • Ruijie Reyee logo
  • SPRO logo
  • Samsung logo
  • Shokz logo
  • TP-Link logo
  • TP-Link Omada logo
  • TP-Link VIGI logo
  • Tenda logo
  • Texecom logo
  • Toshiba logo
  • Ubiquiti logo
  • Unify logo
  • Union logo
  • Uniview logo
  • Valcom logo
  • Visonic logo
  • Western Digital logo
  • Yale logo
  • Yealink logo
  • Yeastar logo
  • Yuasa logo
  • Zenith Security Co. logo
  • Zinc logo