You have a recorder in the main building and cameras needed on a barn, a gatehouse or a second unit across the yard. Digging a trench for cable is slow and expensive. A pair of outdoor wireless bridges sends the network across the gap instead.
A bridge is a pair of directional radios. One sits at the recorder end, the other at the far building, pointed at each other. Plug the far-end PoE switch or camera into the remote bridge and it joins the same network as your NVR. Hikvision's 5 GHz bridges use a 12 dBi antenna with a 35° beam, so they need clear line of sight between the two ends.
The 867 Mbps on the box is the radio's air rate. What matters for CCTV is the throughput Hikvision quotes at distance:
| Distance | DS-3WF02C-5AC/O(V3) (single unit, gigabit ports) | DS-3WF02-5AC/D (pre-paired kit) |
|---|---|---|
| 0.5 km | 230 Mbps | 90 Mbps |
| 1 km | 200 Mbps | 90 Mbps |
| 5 km | 40 Mbps | 40 Mbps |
| Point-to-multipoint | 1 to 8 at 80 Mbps / 1 km | 1 to 4 at 80 Mbps / 1 km |
A 4MP camera on H.265 typically uses a few Mbps, so even the 5 km figure carries several cameras. Work out your total camera bit rate and leave headroom.
Both are IP55 rated, pole mounted and rated from −30 °C.
Yes. Hikvision quotes point-to-multipoint for up to 8 remote units on the DS-3WF02C-5AC/O(V3) and 4 on the kit.
No. Plan for clear line of sight.
Zenith Security Co is an authorised Hikvision partner and supplier (not an installer), trading since 2012 from our Wolverhampton trade counter. Hikvision prices are shown to trade account holders: apply for a trade account, contact us or call 01902 902251. We deliver to England, Scotland and Wales.





















































