An alarm is only as good as its link to you or your monitoring centre. If everything relies on one broadband line, a cut cable, router fault or provider outage can stop alerts reaching anyone. The fix is two independent paths, normally wired Ethernet first with cellular behind it, and ideally a SIM that can use more than one mobile network.
We have already explained what happens to an Ajax system during a power cut in our post on whether your alarm still works if the power or broadband goes off. This article focuses on the communication side: how to design signalling that keeps working.
Alarm events, photo verification and live video all travel over the internet to apps and monitoring stations. When that link drops, the detectors may still trigger, but nobody hears about it. Ajax neatly sums up the risk: "A single outage can bring even the best protection to a halt."
Use a wired primary, such as Ethernet from the router, and a cellular secondary. If the primary fails, the hub switches to the mobile network automatically. Because the two paths do not share the same cable or provider, a single fault is unlikely to take both down.
A cellular backup on one carrier still has a single point of failure: that carrier's masts. A hub with two SIM slots, or a multi-network SIM, can move to another provider during an outage or mast maintenance.
Ajax hubs have built-in modems, and models differ in their connection options. A 4G hub such as the Hub 2 (4G) gives you Ethernet and cellular in one panel. For wired Fibra projects, the Superior Hub Hybrid range adds wired detector lines. Check each hub's datasheet for the exact channels it supports.
Sourcing SIM cards, managing mobile contracts and chasing failed top-ups adds time to every job. Ajax SIM is Ajax's own answer to that:
Ajax services are not available in every country, so use Ajax's service availability checker or ask us before you rely on it for a UK project.
Plug the hub into the router by Ethernet rather than relying on Wi-Fi alone, and make sure the cellular backup is active and tested.
Tenants change broadband providers and move routers. A cellular path means the alarm keeps reporting regardless.
If the system is monitored, dual-path signalling should be the default. Test failover at handover by unplugging the Ethernet and confirming events still arrive.
We stock Ajax hubs at our Wolverhampton trade counter and online, with orders dispatched within 1–2 working days.
It is better than nothing, but a single connection is a single point of failure. Pair a wired or Wi-Fi link with cellular backup.
It can use multiple carriers and switches to the strongest network when signal drops, under one subscription.
Yes, in the Ajax app, within three days of the hub's initial setup.
It helps when the router loses power, as long as the hub has its own backup battery. See our power cut guide for details.
Source: Ajax Systems, Why every system needs a backup — and how to build it. Product details are correct at the time of writing; always check the latest Ajax documentation before installation.





















































