The Ajax EN54 Line is a fully wireless fire detection and alarm system for commercial and municipal buildings, controlled by the EN54 Fire Hub Jeweller touchscreen panel. Ajax PRO Desktop 5.54 and later can now record the radio signal strength of every surveyed EN54 device in a maintenance report that exports as a PDF. For installers, that means survey evidence for handover and a baseline for future service visits.
EN 54 is the European standard series covering components of fire detection and fire alarm systems. Ajax's EN54 Line is its range of wireless devices built for that type of installation, aimed at offices, shops, schools, municipal buildings and other non-domestic sites where running fire cable through every room is slow, disruptive or impractical.
At the centre is the EN54 Fire Hub Jeweller, a control and indicating equipment (CIE) panel with a large touchscreen. Ajax says it shows detailed system status and alarm notifications so staff can understand an incident straight away. Key points from Ajax:
The EN54 range includes wireless heat, smoke, sounder and combined devices, plus the EN54 Fire ReX Jeweller range extender for areas where the signal from the panel needs a boost. Always design the system to the relevant standards and check device compatibility in the Ajax documentation.
With a wireless fire system, the radio link is as important as the cable would be in a wired one. A survey confirms that every device can communicate reliably with the panel from its installed position. Until now, recording those results usually meant notes, screenshots or spreadsheets put together by hand.
After completing the survey, the installer generates a Maintenance report in Ajax PRO Desktop. It includes:
The report can be exported and downloaded as a PDF, ready to attach to project files.
Detailed maintenance reports need Ajax PRO Desktop 5.54 or later, which runs on Windows and macOS.
Add the PDF to your commissioning documentation as evidence that the wireless network was surveyed. It gives the client, the fire risk assessor or the building manager verifiable data rather than a verbal assurance, and it saves time compared with writing results up manually.
The first report becomes a baseline. On a later visit, run the survey again and compare. If a reading has dropped, something may have changed, such as new partitions, shelving, metal fixtures or a different room layout. You can then move the device or add an EN54 Fire ReX Jeweller to extend coverage.
Zenith Security Co. supplies Ajax fire products from our Wolverhampton trade counter, with orders dispatched within 1–2 working days. See the Ajax EN54 Fire Hub Jeweller and the EN54 Fire ReX Jeweller range extender, or browse our wider fire alarm range. For help planning a commercial project, contact our team.
Ajax describes the EN54 Line as a fully wireless fire detection and alarm system, with the Fire Hub connecting to devices wirelessly.
Ajax PRO Desktop version 5.54 or later, on Windows or macOS, generates the Maintenance report.
An overview of the system's current state and the signal strength in dB for each surveyed EN54 device, exportable as a PDF.
Ajax suggests relocating the device or extending coverage with an EN54 Fire ReX Jeweller.
Source: Ajax Systems, EN54 Fire Hub Jeweller wins GIT Security Award 2027 and Automated radio signal survey reporting for EN54 Line. Product details are correct at the time of writing; always check the latest Ajax documentation before installation.





















































