Ajax Line Crossing Detection: Smarter CCTV Alerts Explained

Line crossing detection is a new Ajax video analytics feature that raises an event only when a person, animal or vehicle crosses a virtual line you draw in the camera view. Each line has its own direction, so you can alert on people coming in and ignore people going out. It works on Ajax wired cameras and NVRs with current firmware and apps, but not on DoorBell or IndoorCam.

Why line crossing beats plain motion detection

Basic motion detection reacts to anything that changes in the picture: passing cars, swaying trees, shadows, neighbours walking past. On a busy site that means a steady stream of alerts that people quickly learn to ignore. Line crossing narrows the trigger to one specific event, an object of a chosen type crossing a defined boundary, so the alerts that do arrive are far more likely to matter.

How it works

Draw the line

In the Ajax app, you draw a line across the camera image where crossing should count, such as a gateway, a fence line or the threshold of a loading bay.

Set the direction

Every line has its own crossing direction. A typical setup alerts when someone enters a restricted area and ignores movement leaving it, which suits staff car parks or yards where people regularly walk out.

Choose the object types

You decide whether people, animals or vehicles should trigger the line. A driveway might watch for people and vehicles, while a garden boundary might ignore animals to avoid alerts from foxes and pets.

Up to four lines per camera

Each camera supports up to four lines, each with its own direction and conditions, so one camera can watch a gate and a side path at once.

What happens when a line is crossed

  • The system can send a notification or raise an alarm.
  • Footage can be recorded to the archive.
  • Sirens can be activated for an immediate on-site response.
  • Each event shows which line was crossed and what type of object crossed it.

Knowing which line fired and whether it was a person or a vehicle helps you decide quickly whether to check the footage or act.

Placement tips

  • Keep lines away from the edges of the frame. Ajax advises this for reliable detection.
  • Make lines long enough. A short line is easy for an object to miss.
  • Think about the route people actually take. Place the line where anyone entering must cross it, such as a gate opening or a door threshold.
  • Test it. Walk the route in both directions after set-up to confirm alerts behave as expected.

Requirements

  • Wired cameras on firmware 2.569 or later.
  • NVRs on firmware 2.565 or later.
  • Ajax Security System 3.52 and Ajax PRO: Tool for Engineers 2.52 on iOS or Android.
  • Ajax Desktop 5.52 and Ajax PRO Desktop 5.52 on Windows or macOS.

DoorBell and IndoorCam do not support the feature. Ajax publishes a support article with step-by-step configuration instructions.

Where it is most useful

  • Homeowners: driveways and side gates, where you only care about someone coming onto the property.
  • Landlords: communal entrances and bin stores at blocks of flats.
  • Small businesses: yards, loading areas and staff-only doors out of hours.
  • Installers: sites where clients have given up on motion alerts because of nuisance triggers.

Buying Ajax from Zenith

Zenith Security Co. supplies Ajax CCTV from our Wolverhampton trade counter, with orders dispatched within 1–2 working days. Build a system with our Ajax CCTV system builder, or look at the Ajax BulletCam HL (5 Mp/2.8 mm) and the Ajax NVR H2DAC (8-ch). Need advice on camera positions? Contact our team.

Frequently asked questions

How many lines can I set per camera?

Up to four, each with its own direction and conditions.

Can it tell people from vehicles?

Yes. You choose whether people, animals or vehicles trigger each line, and events show the object type.

Does it work on the Ajax DoorBell?

No. DoorBell and IndoorCam do not support line crossing detection.

Can a crossing set off a siren?

Yes. As well as notifications and recording, the system can activate sirens for an on-site response.

Source: Ajax Systems, Line crossing detection — a new feature for even more accurate video monitoring. Product details are correct at the time of writing; always check the latest Ajax documentation before installation.

Published at: 15-11-2026 / 1 Views
  • Ajax logo
  • AV:Link logo
  • Adastra logo
  • AudioCodes logo
  • Brackenheath logo
  • C.K Tools logo
  • Cisco logo
  • Citronic logo
  • Coast logo
  • Cürv logo
  • Dahua logo
  • EPOS logo
  • Eagle CCTV logo
  • Excel Networking logo
  • Fike logo
  • Gigaset logo
  • Grandstream logo
  • HP Poly logo
  • HiLook by Hikvision logo
  • Hikvision logo
  • Honeywell logo
  • Jabra logo
  • Lexstar logo
  • Mercury logo
  • Mercusys logo
  • Mitel logo
  • Panasonic logo
  • Paxton logo
  • Pyronix logo
  • Ring logo
  • Ruijie Reyee logo
  • SPRO logo
  • Samsung logo
  • Shokz logo
  • TP-Link logo
  • TP-Link Omada logo
  • TP-Link VIGI logo
  • Tenda logo
  • Texecom logo
  • Toshiba logo
  • Ubiquiti logo
  • Unify logo
  • Union logo
  • Uniview logo
  • Valcom logo
  • Visonic logo
  • Western Digital logo
  • Yale logo
  • Yealink logo
  • Yeastar logo
  • Yuasa logo
  • Zenith Security Co. logo
  • Zinc logo