Ruijie Reyee Case Study: Wi-Fi for a Historic UK Office Building

Croft Myl is an early-1900s mixed-use office building in the UK, covering more than 9,000 square feet, where tenants were struggling with unreliable Wi-Fi. Ruijie Networks replaced the network with a Reyee system built around an RG-EG1510XS gateway, Reyee PoE switches and 17 access points. According to Ruijie, the building's IT manager reports a stable network with far fewer problems at busy times.

The problem

Old buildings are hard on Wi-Fi. Thick walls, awkward layouts and cabling that was never designed for modern use all get in the way. At Croft Myl, tenants and visitors were dealing with unstable connections, slow speeds and drop-outs, and the worst areas were the meeting rooms and open-plan spaces where people gather. Earlier attempts to fix it had not worked, so the owner brought in Ruijie Reyee.

What the building needed

  • Fast, stable Wi-Fi on every floor, including the busiest areas
  • Capacity for more than 1,000 devices, from laptops and phones to printers, with bandwidth control and secure sign-in
  • Simpler IT management, with easier monitoring and upgrades

The solution

Ruijie carried out a full network upgrade rather than patching the old system. The equipment list in the case study is:

  • 1 x RG-EG1510XS gateway, which Ruijie say supports up to 1,500 concurrent clients
  • 1 x RG-NBS3100-48GT4SFP-P core PoE switch
  • 4 x RG-NBS3100-24GT4SFP-P access PoE switches
  • 15 x RG-RAP2260(G) Wi-Fi 6 ceiling access points
  • 2 x RG-RAP62-OD outdoor access points

How the design works

The structure is a familiar one: a single gateway handles the internet connection and client load, a core switch sits in the middle, and access switches on each area power the access points over PoE. Ruijie highlight two software features. AI-driven Wi-Fi optimisation adjusts channels and roaming settings automatically, and smart roaming helps devices hand over cleanly from one access point to the next as people move around the building.

The outcome

Ruijie quote Chief IT Manager Dean Walker as saying performance "saw a dramatic improvement" after the upgrade. He reports that the network now runs without disruption for tenants and visitors, and credits the automatic optimisation with reducing problems at peak times. The case study does not publish measured speeds or device counts, so the result is the customer's own account.

Lessons for UK installers

Survey before you specify

In period buildings, wall construction changes how far signal travels. Fifteen ceiling access points across 9,000-plus square feet reflects a design built for density and difficult walls, not just floor area. Plan for coverage in the rooms people actually use.

Size the gateway for devices, not people

Multi-tenant buildings collect devices quickly. Choosing a gateway rated well above the expected client count, as here, leaves headroom as tenants change.

Do not forget outside

The two outdoor access points are a reminder that car parks, courtyards and entrances often need coverage too.

Think about ongoing management

One of the customer's requirements was easier IT management. A single Reyee system with central monitoring is easier to look after than a mix of unmanaged kit added over the years.

Buying Ruijie from Zenith

We stock the main products from this project, including the RG-EG1510XS gateway, the RG-NBS3100-48GT4SFP-P PoE switch, the RG-RAP2260(G) ceiling access point and the RG-RAP62-OD outdoor access point. To plan a similar system, try our Ruijie network kit builder, browse the Ruijie Reyee range, or contact us with a floor plan. We supply the equipment rather than install it, and orders are dispatched within 1–2 working days.

Frequently asked questions

How many devices was the network designed for?

The brief was more than 1,000 devices. Ruijie say the RG-EG1510XS gateway supports up to 1,500 concurrent clients.

Which access points were used indoors?

Fifteen RG-RAP2260(G) Wi-Fi 6 ceiling access points, with two RG-RAP62-OD units for outdoor areas.

Can Reyee Wi-Fi work well in an old building?

This case study suggests it can, with enough access points placed for the building's layout. A site survey is the best way to plan coverage through thick walls.

Who carried out this project?

The case study is published by Ruijie Networks. Zenith supplies Ruijie Reyee equipment but was not involved in this installation.

Source: Ruijie Networks, How Ruijie Built a Reliable Network for a UK Historic Mixed-Use Office, Powering Productivity in Competitive Industries. Product details are correct at the time of writing; always check the latest manufacturer documentation before installation.

Published at: 15-11-2026 / 2 Views
  • Ajax logo
  • AV:Link logo
  • Adastra logo
  • AudioCodes logo
  • Brackenheath logo
  • C.K Tools logo
  • Cisco logo
  • Citronic logo
  • Coast logo
  • Cürv logo
  • Dahua logo
  • EPOS logo
  • Eagle CCTV logo
  • Excel Networking logo
  • Fike logo
  • Gigaset logo
  • Grandstream logo
  • HP Poly logo
  • HiLook by Hikvision logo
  • Hikvision logo
  • Honeywell logo
  • Jabra logo
  • Lexstar logo
  • Mercury logo
  • Mercusys logo
  • Mitel logo
  • Panasonic logo
  • Paxton logo
  • Pyronix logo
  • Ring logo
  • Ruijie Reyee logo
  • SPRO logo
  • Samsung logo
  • Shokz logo
  • TP-Link logo
  • TP-Link Omada logo
  • TP-Link VIGI logo
  • Tenda logo
  • Texecom logo
  • Toshiba logo
  • Ubiquiti logo
  • Unify logo
  • Union logo
  • Uniview logo
  • Valcom logo
  • Visonic logo
  • Western Digital logo
  • Yale logo
  • Yealink logo
  • Yeastar logo
  • Yuasa logo
  • Zenith Security Co. logo
  • Zinc logo