Hikvision DS-1272ZJ-110B - Wall Mount Bracket with Deep Base

The Hikvision DS-1272ZJ-110B is a genuine Hikvision wall mounting bracket for mini dome cameras, built with a deeper body than the standard 110 so the cable joints sit inside the mount itself.

Who is it for?

Wall installs where the cable comes out of the brickwork behind the camera rather than through the bracket. The extra depth takes the connectors and the leftover slack, so there is no separate junction box bolted alongside and nothing taped to the render.

Otherwise it does what any wall bracket does: holds the camera clear of the wall so it can be aimed down and across the area, instead of staring at the ground immediately beneath it.

What you'll need with it

• A matching camera. Hikvision brackets are model-specific — the fixing pattern and neck diameter must line up. Send us your camera model and we will confirm before you order.
• Fixings for the substrate — brick, block, render and timber each want a different plug and screw.
• Sealant for the wall entry, which is what actually keeps water out of the cable run.

Frequently asked questions

How does it differ from the DS-1272ZJ-110?

Same reach, deeper body. The B version has room inside for the cable joints, so you normally do not need a separate junction box.

Is the B a colour code?

No. An unbracketed B in a Hikvision bracket code means a different version of the part, not a black finish — the black variants are written as (B).

Is it suitable outdoors?

Yes. Seal the wall entry properly on installation.

Browse all CCTV brackets and accessories or the dome camera range. Need help matching a bracket? Contact us, call 01902 902251, or visit the Wolverhampton trade counter.