Ajax CableTrunk Trunking Accessory for FireProtect 2 AC

Ajax CableTrunk - Trunking Accessory for FireProtect 2 AC Detectors

CableTrunk goes between the ceiling and a mains-powered Ajax FireProtect 2 AC detector on jobs where the power cable has to arrive in surface trunking instead of through the ceiling. The cable enters from the side, runs to the WAGO 221 connectors in the detector's SmartBracket and stays covered by the detector. The SmartBracket clips onto CableTrunk's latches, so it holds in place while you put the screws in. You can fit CableTrunk in four positions and turn it so the detector's LED faces the people who need to see it. It is 18 mm deep, so the detector sits only a little lower than it would without it. Choose white or black above.

Also listed as 93360 (white) and 93359 (black). Ajax model ID CTK.Y.Y.

Key features

• Takes the mains cable from standard surface trunking into the side of a FireProtect 2 AC detector.
• Ajax lists it as compatible with all FireProtect 2 AC fire detectors.
• Latches hold the detector's SmartBracket mounting panel before you fix it with screws.
• Four fixing positions, so the detector's LED can face the room.
• 18 mm deep, so it adds very little height under the detector.
• Polycarbonate body, 144.7 × 89.3 × 18 mm, weighing 33 g.
• Rated for -25 °C to +60 °C and humidity up to 80%.

Technical specification

Works with

Ajax FireProtect 2 AC detectors, for example FireProtect 2 AC (Heat/Smoke) Jeweller, FireProtect 2 AC (Heat/Smoke/CO) Jeweller and FireProtect 2 AC (CO) Jeweller. It is made for these mains-powered AC versions; the RB and SB versions run on batteries.

Common questions

When do I need CableTrunk?

When the mains cable for a FireProtect 2 AC detector runs along the ceiling in surface trunking rather than coming through it. CableTrunk lets the cable enter the detector from the side and keeps it covered.

Which detectors does it fit?

Ajax lists it for all FireProtect 2 AC fire detectors, which are the mains-powered versions of FireProtect 2.

Will the LED still be easy to see?

Yes. It can be fitted in four positions, so you can turn it to suit where people will look at the detector.

Does it come with fixings?

Yes. An installation kit and a quick start guide are in the box.

What conditions is it rated for?

-25 °C to +60 °C and humidity up to 80%. The detector has its own rating, so check that as well.

Full manufacturer specification: Ajax CableTrunk product page

Supplied by Zenith Security Co, Wolverhampton. Orders placed before 2:30pm are normally dispatched for delivery within 1-2 working days to England, Scotland and Wales, or collect from our Wolverhampton trade counter (please call first).

Browse the full Ajax range, more Ajax wireless fire alarms, or contact us on 01902 902251 for advice.